To Operate The Receiver; To Operate A Cassette Deck - Technics SA-DX940 Operating Instructions Manual

Make sure the remote control is in the tuner operation mode (=,_ Page 32).
Point the remote control
toward the receiver
To listen to radio broadcasts
TUNEW
To select "FM" or
"AM"
To select the desired ,/rgA
channel sequentially
(Preset tuning)
Changes as tollows each time the button is
pressed.
FM _ AM
To select the desired
channel directly
(Preset tuning)
To select radio
stations by frequency
(Directtuning)
(Example: Channel 1)
O
!
1 2 3
000
©©G©'
, s©©
CO
(Example: Channel 10)
_IGrr_TEFI 1 0
within 10 seconds
.... ©©©
©©
(Example: 107.9MHz)
within 10 seconds
Turn the cassette deck ON before trying to operate it by remote control.
Make sure the remote control is in the cassette deck operation mode (=_ Page 32).
It may not be possible to operate some cassette decks with this unit.
Point the remote control
toward the cassette deck
Only when using a double
cassette deck _=
To select the tape Q
deck (DECK l/DECK 2)
To start playback O
TO fast-forward or
rewind the tape
To stop playback
While the tape is stopped
0 0
With TPS-equipped cassette decks, you can move to the beginning
or end ot a track by pressing these buttons while the tape is
playing.
O
ROT5308