Connecting
6.2 Connecting SITRANS LR500 series
6.2.3
Connecting field device and SITRANS AW050 Bluetooth adapter
Procedure
NOTICE
General purpose use
SITRANS AW050 Bluetooth module is only approved for use with general purpose non-
hazardous devices
When the HMI adapter is already installed, follow these steps to connect the field device:
1. Remove the current HMI cable.
2. Connect the black cable to the HMI display.
3. Connect the grey cable to the device.
①
②
The cables are best run separately inside the enclosure as shown in the figure following. Take
care when installing the display to be sure that the cables are not pinched or torn. Excessive
force should not be necessary for installation of the display mounting.
54
To the optional HMI
To the electronics
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA