Installation Requirements - LG MH703 Series Owner's Manual

INSTALLATION
14
in the form of electromagnetic radiation,
inductive and /or capacitive coupling, for the
treatment of material or inspection/analysis
purposes.
Class B equipment is equipment suitable for use
in domestic dwellings and domestic dwellings
directly connected to a low voltage power
supply network which supplies buildings used
for domestic purposes.
NOTE
• When operating at 100% and 80% power levels
for prolonged periods, the output power will be
reduced gradually to help prevent the unit from
electrically overheating.

Installation Requirements

Installation Location
1
Place the microwave oven on a flat surface with
more than 85 cm height.
• The front of the oven should be at least 8 cm
from the edge of the surface to prevent
tipping.
2
Allow at least 20 cm from the top, 20 cm from
the sides, and 20 cm back of the oven for
proper ventilation.
• Free airflow around the oven is important.
• An exhaust outlet is located on bottom or
side of the oven. If you use the microwave
oven in an enclosed space or cupboard, the
air flow for cooling the product could be
worse. It may result in lower performance
and reduced service life.
20 cm
20 cm
20 cm
20 cm
3
Place the rotating ring inside the oven and
place the glass tray on top.
4
Insert the power plug into an outlet.
• Do not block the outlet to prevent damage
the oven.
• Make sure the microwave oven is the only
appliance connected to the socket.
• If your oven does not operate properly,
unplug it from the electrical socket and then
plug it back in.
NOTE
• Do not place oven above a gas or electric range.
• The setting of the cooking time should be
shorter than common microwave ovens (700 W,
800 W) due to the relatively high output power of
the product.
Radio Frequency Interference
• When operating the microwave oven, If you use
a product such as radio, TV, wireless LAN,
Bluetooth, medical equipment, wireless
equipment etc.
• Using the same frequency as the microwave
oven, the product may receive interference from
these products. This interference does not
indicate a problem of the microwave or the
product and is not a malfunction. Therefore, it is
safe to use. However, medical equipment may
receive interference as well, so use caution when
using medical equipment near the product.