Table of Contents
Advertisement
INSTALLATION
14
Accessories
a
Glass Tray
b
Rotating Ring
Shaft
c
CAUTION
• Do not use the microwave oven without the glass tray and rotating ring.
Specifications
Power supply and power consumption may vary
depending on the model purchased. Refer to the
labels for details.
MS426**** Model
• Microwave Output: Max. 1200 W
• Frequency: 2450 MHz
• Outside Dimensions (W x H x D): 544 mm x 308
mm x 441 mm
• Oven Cavity Dimensions (W x H x D): 395 mm x
262 mm x 406 mm
• Power Supply: 230-240 V~ 50 Hz
• Power Consumption: Microwave 1350 W
*1 IEC 60705 RATING STANDARD. Specifications
are subject to change without prior notice.
*2 Microwave Frequency: 2450 MHz +/- 50 MHz
(Group 2 / Class B)
Group 2 equipment: group 2 contains all ISM RF
equipment in which radio-frequency energy in
the frequency range 9 kHz to 400GHz is
intentionally generated and used or only used,
in the form of electromagnetic radiation,
inductive and /or capacitive coupling, for the
*1
*2
treatment of material or inspection/analysis
purposes.
Class B equipment is equipment suitable for use
in domestic dwellings and domestic dwellings
directly connected to a low voltage power
supply network which supplies buildings used
for domestic purposes.
NOTE
• When operating at 100%, 90% and 80% power
levels for prolonged periods, the output power
will be reduced gradually to help prevent the
unit from electrically overheating.
Installation Requirements
Installation Location
1
Place the microwave oven on a flat surface with
more than 85 cm height.
• The front of the oven should be at least 8 cm
from the edge of the surface to prevent
tipping.
Advertisement
Table of Contents
