Delaying The Program - Smeg DWF410SS Instruction Manual

User instructions

DELAYING THE PROGRAM

The PROGRAM DELAY button (4) can be pressed to delay the start of
the program by up to 12 hours .. This means that the dishwasher can
be operated at the time of day of your choice.
The first time the PROGRAM DELAY button (4), is pressed the display
will show 12 hours, the maximum delay time before the program will
start. Each subsequent time the button is pressed the delay time will be
reduced, until the desired delay time is reached.
Particularly, on the display it will have the
following indications.
Chosen the delay, proceed with the program start, press the button
START/STOP (5) for same seconds until the clock symbol start to
flaash.
The machine will perform a dish pre-washing, and when finish, the "delay
program" will enter in function as it was first set.
In case you want to put to zero the "delay program" within the running
program it is necessary:
•
to press the START/STOP (5) button for some seconds until the
clock symbol remain lid up on the display;
•
to press the DELAY PROGRAM (4) more times until the reset of the
delay program (clock symbol shut off);
•
to press the START/STOP (5) button to make start the program.
N.B.: It is not possible to select the "delay program" when the program
have already began.
43