Radio Operation; Switch Between Usa Area And Europe Area Frequency; Change Bands (Band); Manual Tuning ( / ) - Boss Audio Systems ELITE 660BRGB User Manual

RADIO OPERATION

Switch Between USA area and Europe area Frequency

In radio mode, press the
frequency, then rotate it to switch between US(USA) and EU(europe) frequency.
The system will change the frequency setting in about 3 seconds.

Change Bands (BAND)

Press the BAND button to switch between the FM1, FM2, FM3, AM1 and AM2 bands.
Each band stores up to six preset stations.
Manual Tuning (
Press and hold the
tuning mode. In manual tuning mode, press the
number up or down one step.
Auto Seek Tuning (
In standby mode or while not in manual tuning mode, quickly press the
move to the next/previous available station automatically.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for a
total of 30 preset stations.
To memorize a station:
- Turn the radio on and select the desired band and station.
- Select a station by
- Press and hold the desired preset button (numbered 1-6 on the face of the radio) for more
than 2 seconds to save the station to that preset number.
- To recall a preset station:
- Select the desired band.
- Briefly press a preset button (numbered 1-6) to recall the corresponding preset station.

Automatic Store station/ Preset station scan (AMS)

Press and hold the
them in the current band. The radio will automatically scan the current frequency and enter
the six strongest stations into the preset memory positions for that band.
Briefly press the AMS
station that saved in the memories in each band.

LOCAL/DX

In urban areas, most stations are strong enough and "LOCAL ON" mode should be selected.
Switch to LOCAL OFF mode to search for stations with weaker signals.
Press the LOC button on the remote control to choose local or distant reception mode.

STEREO/MONO

FM station is received in stereo mode. However, if the signal
good as you would like, switching to MONO mode usually improves the overall sound quality.
Press the ST button on the remote control to choose FM STEREO or MONO audio effect.
VOL button to enter the switch state of the US(USA) and EU(europe)
/ )
or button on the front panel or on the remote control to enter manual
/ )
or button
AMS button for more than 2 seconds to select six strong stations and store
button on the front panel or on the remote control to recall each preset
or
.
button to move the radio frequency
is weak or reception is not as
or button to
7