Radio Operation - Boss Audio Systems BV7280 User Manual

Radio Operation

1. Choose Radio Band
Press the SRC Button to access the radio function. Then press the BAND button
to choose among the five radio bands - three FM Bands (FM1, FM2, and FM3)
and two AM Bands (AM1, and AM2). Each of the five bands can store up to six
preset stations, for a total of 30 preset memory stations.
2. Radio Tune/Seek Function
In radio mode, press the Seek +/- button to automatically seek the next strong
and clear radio station. Press and hold the Seek +/- button until the screen
shows MANU SEEK. At this time, you can manually find your desired frequency.
Wait until the MANU SEEK to disappear in order to perform auto seek again.
3. Automatic Store/Preset Scan
A. Automatic Scan & Store
While listening to the FM Radio, press and hold the APS Button for 3 seconds.
The receiver will automatically scan and save stations for all the 3 FM Bands,
whichever band (FM1, 2 or 3) you are listening to.
While listening to the AM Radio, press and the APS Button for 3 seconds. The
receiver will automatically scan and save stations for the 2 AM Bands, whichev-
er band (AM1 or 2) you are listening to.
B. Scan Saved Stations
In radio mode, press the APS button on the unit or on the remote control once
to perform the scanning functions. The word SCAN will be shown at the screen.
4. Save your Preset Stations
There are six numbered preset buttons which can store and recall stations for
each band. While listening to a radio station you would like to save as a preset,
press and hold one of the buttons numbered 1-6 until you hear a beep. The
button you pressed is now the pre-set button for that station. You can find the
same buttons numbered 1-6 with the same function on the remote control.
5. Mono/Stereo Reception Control
In FM radio mode, Press the SEL Button repeatly until "ST" is shown on the
display. Roate the VOL +/- to select ST ON or OFF. Improvement of reception of
distant stations can be done by selecting ST OFF operation which may cut down
some reception noise.
6. Local / Distant Control
In FM radio mode, Press the SEL Button until "LOC" is shown on the display.
Roate the VOL +/- to select LOC ON or OFF.
Local and distance reception setting can facilitate the radio reception, depending
on the location in which the radio is being used.
8. Switchable Frequency
The default radio frequency of this product is for Europe. However, you can set
different frequency modes if you are using this product outside Europe. Press
the HOME button and rotate the volume knob to select SETUP. Enter the SETUP
menu and select Radio Area by press the volume knob. Rotate the volume knob
to choose the options and press the volume knob again to confirm the setting.
Select your desired radio frequencies as follows:
a. America1 (for U.S.) – FM 87.5-107.9MHz, AM 530-1710KHz.
b. America2 (for South America) – FM 87.5-108MHz, AM 530-1710KHz.
c. Europe (for European and Asia) – FM 87.5-108MHz, AM 522-1620KHz.
9