Making Measurement; Rotary Switch Positions - Amprobe AM-500-EUR User Manual

MAKING MEASUREMENT

X�
1. Use the proper function and range for
measurements.
2. To avoid possible electrical shock, personal injury or
damages to the Meter, disconnect circuit power and
discharge all high-voltage capacitors before testing
resistance and diode.
3. Connecting test leads:
• Connect the common (COM) test lead to the circuit
before connecting the live lead.
• After measurement, remove live lead before
removing the common (COM) test lead from the
circuit.
4. Symbol "OL" is displayed on LCD when the
measurement is out of range.

Rotary Switch Positions

Switch Position
V
e
G
9V
1.5V
μA mA
AC or DC voltage measurement (use
SELECT button for switching to AC
or DC).
Resistance measurement
Voltage measurement of diode PN
junction
Continuity measurement
For measurement of dry batteries of
not exceeding 15Vdc
For measurement of dry batteries of
not exceeding 2Vdc
AC or DC current measurement (use
A SELECT button for switching to AC
or DC).
Measurement Function
5