Weld Output Terminals; Process/Polarity Table - Miller Millermatic 355 Owner's Manual

5-12. Weld Output Terminals

5-13. Process/Polarity Table

Process
GMAW — Solid wire
DCEP — Reverse Polarity
with shielding gas
FCAW—S — Self-
shielding wire-no DCEN — Straight Polarity
shielding gas
FCAW—G — Flux-
cored wire with shield- DCEP — Reverse Polarity
ing gas
OM-288360 Page 26
1
output term1 2015−02
2
Polarity
Wire Drive Assembly Cable
Connect to positive (+) output
Connect to negative (-) output
Connect to positive (+) output
Turn off unit and disconnect input
power before making connections.
Do not use worn, damaged, under-
sized, or repaired cables.
1 Positive (+) Weld Output Terminal
2 Negative (-) Weld Output Terminal
See Section 5– 14 for information on con-
necting to weld output terminals and stand-
ard connection diagrams.
Cable Connections
Connect to negative (-) output receptacle
receptacle
Connect to positive (+) output receptacle
receptacle
Connect to negative (-) output receptacle
receptacle
Work Cable