Table of Contents
Advertisement
25
5. Installation Environment for Built-in
Refrigerator
■
1. There must exist a structure that air can
enter through the suction inlet and can
discharge through the discharge outlet.
2. Ensure that No. ② path can be obtained
in case of installation environment
where No. ① path is obtained.
3. Ensure that the air circulation space in
the No. ①, ② of more than 200cm
be obtained.
Caution
Required conditions of furniture bottom
surface
- Bottom surface:
It is required to use T 20mm to obtain strength.
- Space stand:
Ensure to install the space stand so that the
furniture surface may be distorted due to inside
weight (Max 200kg: Product + Food +
Furniture Door + Shock in opening or closing).
- Level:
Distortion of the whole of furniture may be
resulted in or the door will not be closed due
to weight of product unless level of the bottom
surface is suitable.
can
2
■Plan drawing of installation furniture case and
maximum opening of door
Advertisement
Chapters
Table of Contents
