Battery Replacement
if "Recharge" is displayed and/or "{
01" flashes after being fully
charged, replace the battery with a new Panasonic P-P504 battery. To
order, call the accessories telephone number on page 2.
1
Press the notch on the battery
cover firmly and slide it as
indicated by the arrow.
2
Remove the old battery. Then
install the new one.
elnsert the battery plug into the
connector as shown in the picture.
3
Close the cover. Make sure you
charge the new battery for about
15 hours in order to display the
battery strength prompt correctly
(p. 12).
A nickel cadmium battery that is recyclable powers the
product you have purchased. At the end of its useful
life, under various state and local laws, it is illegal to
dispose of this battery into your municipal waste
stream. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Adding Another Phone
This unit will not function during a power failure. To connect a standard
telephone on the same line, use the Panasonic T-adaptor KX-J66.
To order, call the accessories telephone number on page 2.
Standard
Y
Telephone
Single-Line
UONe
-
Telephone Jack
Telephone
Line Cord
T-Adaptor (KX-J66)
è