7.6.3
Operation mode read/write
Read/write of the operation mode can be performed from the master.
PNU
P3
Operation mode read/write
7.6.4
Set frequency read
The frequency set to the inverter can be read from the master.
PNU
P4.1
Set frequency (RAM) read
Set frequency (EEPROM)
P4.2
read
7.6.5
Terminal input read
Analog input values of terminals 2, 4, and 1 can be read.
PNU
P5.1
Terminal 2 input value read
P5.2
Terminal 4 input value read
P5.3
Terminal 1 input value read
7.6.6
Inverter reset
The inverter can be reset from the master.
PNU
P6
Inverter reset
• The inverter maintains the resetting status while reset is requested.
• When Pr.75 Reset selection/disconnected PU detection/PU stop selection = "1, 3, 15, 17, 101, 103, 115, 117", reset is
enabled only during an inverter error.
62
PPO TYPE SUPPORT SPECIFICATION
Item
External operation mode: H10
PU operation mode: H11 (For writing, when "6" is set in Pr.79)
Network operation mode: H14
Item
Set frequency (RAM) is read.
Set frequency (EEPROM) is read.
Item
Terminal 2 input value (%) is read.
Terminal 4 input value (%) is read.
Terminal 1 input value (%) is read.
Item
The inverter is reset after the data was written from the master.
Data definition
Data definition
Data definition
Data definition
Data type
Us16
Data type
AUs16
AUs16
Data type
AUs16
AUs16
AUs16
Data type
Us16