Advertisement
2.4 Electrical connection
Check that the voltage and the frequency of
the mains match the ratings on the name plate
of the appliance positioned on the inner edge
of the door.
The plug on the supply cord and the corresponding
socket outlet must be of the same type and meet the
regulations in force.
The plug must be accessible after installation.
Never disconnect the plug by pulling on the
power supply lead.
After changing the supply cord, make sure that the
bracket which secures the cord is fixed securely in
place.
Do not use adaptors or shunt connections in
order to avoid the possibility of overheating or
burning.
The power cable must be replaced by the
manufacturer or by an Authorized Service
Centre.
14
Installation
Advertisement
