Product Checking And Accessories - Mitsubishi Electric FR-E800-HVC Series Instruction Manual

1.1

Product checking and accessories

Unpack the product and check the rating plate and the capacity plate of the inverter to ensure that the model agrees with the
order and the product is intact.
 Inverter model
A B
Rating plate
Inverter model
Input rating
Output rating
SERIAL
Country of origin
• A: The voltage class is shown.
Symbol
2 200 V class
4 400 V class
• B: The number of phases of the power source is shown.
Symbol
None Three-phase input
S Single-phase input
• C: The inverter rated current is shown.
Symbol
0011 to 0978 Inverter rated current (A)
• D: The communication specification, monitoring specification, rated frequency, and control logic are shown.
Symb
Communication specification
ol
RS-485 communication (Mitsubishi inverter protocol, MODBUS
-5
RTU, BACnet MS/TP)
• E: Availability of circuit board coating / plated conductors is shown.
Symbol Circuit board coating
-60 With coating
*1 Conforming to IEC 60721-3-3:1994 3C2
C D E
MODEL :FR-E820-0011-5-60HVC
INPUT :XXXXX
OUTPUT:XXXXX
SERIAL:XXXXXXXXXXX
MADE IN XXXXX
Voltage class
Description
Description
*1
F
Monitoring specification
Voltage (terminal AM)
Plated conductor
Without plated conductors
1.1 Product checking and accessories
Rated
frequency Control logic
(initial (initial status)
setting)
60 Hz Sink logic
1. Introduction
1
2
3
4
5
6
7
8
9
10
13