Descaling Procedure - Philips Saeco Map Caffitaly Bravista Latte+ Manual

ENGLISH
24
3 sec

Descaling procedure

The descaling procedure lasts approximately 30 minutes and consists of
a descaling and a rinsing cycle.
Note: Do not interrupt the descaling or rinsing cycle and do not switch off the
machine. During the descaling cycle, the descaling solution will be dispensed
from the coffee and milk dispensing spouts in intervals. During the rinsing
cycle with fresh water, the water comes out of the coffee dispensing spout
continuously.
1 Switch off the machine.
2 Fill the milk carafe with fresh water up to the MIN level.
Place the carafe back onto the machine.
3 Make sure that there is no capsule in the capsule compartment and
that the capsule compartment opening lever is in the closed position.
4 Remove and empty the water tank, drip tray, waste water drawer
and used capsule drawer.
5 Pour the entire bottle of Saeco descaling solution 250ml into the
water tank.
6 Add water to the descaling solution in the water tank up to the
MAX indication.
7 Place the water tank back onto the machine.
8 Remove the metal cup tray from the drip tray and push the drip tray
all the way into the machine.
9 Pull the dispensing spout upwards.
10 Place a bowl with a minimum capacity of 1 litre under the coffee
dispensing spout.
11 Press the on/off button (green) and the café latte button (white)
simultaneously for 3 seconds until the orange service indicator light
and the white espresso button light lights up continuously.
12 Press the white espresso button to start the descaling cycle.
,The machine dispenses the entire descaling solution at regular intervals
through the coffee and milk dispensing spouts. The espresso button flashes
white during the entire descaling cycle.