Solid-State Drive And M.2 Solid-State Drive Bracket (For Selected Models) - Lenovo ThinkPad T14s Gen 5 User Manual

M.2 solid-state drive and M.2 solid-state drive bracket (for selected
models)
Follow the instructions to replace the M.2 solid-state drive.
Before you start, read
Generic Safety and Compliance Notices
Attention:
• If you replace a M.2 solid-state drive, you might need to install a new operating system. For details on how
to install a new operating system, see "Install a Windows operating system and drivers" on page 44.
• If your computer is installed with the color profiles, you need to reinstall the color profiles after installing a
new operating system, see "Color calibration (for selected models)" on page 27.
The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.
• Do not subject the M.2 solid-state drive to physical shocks or vibration. Put the M.2 solid-state drive on a
soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Disable the built-in battery. See "Disable the built-in battery" on page 48.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 48.
50
ThinkPad T14s Gen 5 User Guide
and print the following instructions.