Set Up An Nfc Connection; Use A Smart Card - Lenovo ThinkPad T14s Gen 5 User Manual

Set up an NFC connection

Simply tap and connect your computer and another NFC-enabled device over a few centimeters or inches.
If your computer supports NFC, you will see an NFC mark or label
To turn on NFC:
Type Airplane mode in the Windows search box and then press Enter.
Step 1.
Step 2. Ensure that the Airplane mode is off and turn on the NFC function.
By using NFC, you can simply tap and connect your computer and another NFC-enabled device over a few
centimeters or inches. To pair with an NFC card or smartphone:
Note: Ensure that the NFC card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be
detected.

Use a smart card

You can insert a smart card to transfer data.
Supported smart card specifications: 85.60 mm (3.37 inches) x 53.98 mm (2.13 inches)
Attention: Smart cards with slits are not supported. Do not insert such a smart card into the smart-card slot
of your computer. Otherwise, the reader might get damaged.
around the trackpad area.
.
Chapter 3 Explore your computer
31