Panasonic SC-AK57 Operating Instructions Manual page 32

þa]
€
2
5
à
O
3
2
=
v
č
>
à
`
£
E
>
>
Y
c
3
A
ROT4802 |
CCC &)
DOG
TS 5 oC
sea 7 210
|
| 6CH DISCRETE INPUT mode |
Preparation:
If you have connected a subwoofer (not included) , press and hold
[S.WOOFER] for about 2 seconds so "SUB W ON" is shown on the
display.
1 Hold down [SHIFT] and press [AUX1/2].
The [6CH DISCRETE INPUT] lamp lights.
Adjust the volume of each speaker.
Sit in the normal listening position and make the adjustments
with the remote control.
®© Output the test signal from the DVD player (not in-
cluded}.
Set the channel level to 0 dB on the DVD player, and ad-
just the channel level on this system.
@ Press [VOLUME (— or +)].
Set the volume to the normal listening level.
The following steps are for setting the output level of the front
speakers and the other speakers to approximately the same
level.
@) Press [CH SELECT].
Select the speaker channel to be adjusted.
L: Front speaker (Left)
R: Front speaker (Right)
C: Center speaker
RS: Surround speaker (Right)
LS: Surround speaker (Left)
SW: Subwoofer
@) Press [4, UP] or [Y, DOWN}.
Adjust the output leve!
UP: Increases the output level
DOWN: Decreases the output level
Repeat steps (@) and @ to adjust the level accordingly.
Reference:
Add audio effects to improve the surround effect. (= pages 35, 36)
[Note |
You cannot record sound when [6CH DISCRETE INPUT] is se-
lected.
To record from DVDs, reconnect the DVD player (MIXED OUT) to
AUX1 or 2 terminal on this unit.