Panasonic SC-AK57 Operating Instructions Manual page 19

-5> Do © | CANCEL
Wessel ©
215) 4) HS a) AD) 3 B
Y Specified
disc number
Program |
Indicates program mode
| Listening to compact discs
joe a
RCE ply
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
2 Press [PROGRAM].
3 Press [DISC].
(within 10 seconds or so)
Press [1]-[5] to select the disc you want.
Press the numeric button to select the desired
track.
Repeat steps B-B until you have programmed the desired
track(s).
Press [> /II/a].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [M] will cancel program play, but it will also erase the en-
tire program.
To select a two-digit track
Press [210] and then the two numbers you want.
When "CD FULL" appears FA
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
You can do the following during program mode £)
eCheck program contents.
Press [et /~44] or [p/m].
Everytime you press one of the buttons, the track and program
No. are shown on the display.
e Add to the program.
Repeat steps EX through El.
eCancel entries.
From the last Press [CANCEL].
programmed track
Select the track with [a-a t-a] or
{me / >], and press [CANCEL] within
3 seconds.
A specified track
only
All tracks
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
To replay your program
if you turned off your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [> /ED/a].
If you program a track number not on your CDs
The track is initially programmed, but during program play, the play-
er will skip that track and will continue playing from the next pro-
grammed item.
CD operat | |
RQT4802