Advertisement
1. Use only head components in as-new condition. Use new O-rings each time the head
is assembled.
2. Cover O-rings with a this even layer of Parker Super O-Lube silicone lubricant or the
lubricant recommended by your element supplier.
Glycerin is a commercially available lubricant that will not foul elements. However, silicone lubricant is
3. Assemble the PWT Seal into the groove in the End Plug.
4. Insert the Head Seal O-ring into the groove on the outside diameter of the End Plug.
5.
5. Protect heads from contamination until ready to assemble into the vessel(s).
HEAD ASSEMBLY
Lubricating Plug seals and O-rings
NOTE
recommended for this application.
Inserting PWT seal
Inserting Head Seal
Page 9 of 11
Advertisement
