Quick Setup - HANNspree HF199H Quick Start Manual

Quick setup
1. Power on the computer and monitor.
2. Start the operating system.
3. Insert the CD-ROM into the CD drive on your computer. The CD-ROM will automatically
execute and display the Main Menu.
4. From the Main Menu, click on the options you would like to perform and follow the
directions on the screen.
Troubleshooting
Problems
Check items
• No video
• The power LED
is not lit.
• Check whether the power of screen is on or not.
• Ensure the power cord is connected to screen properly.
• Ensure the power supply is normally in the outlet by tester.
• No video
• The power LED is
orange.
• Ensure the computer is not in power save mode.
(Move mouse or hit any key to wake up the computer)
• Ensure the computer or video source equipment is on.
• Ensure the video signal cable is connected properly.
Warning: To reduce the risk of electric shock or damage to your equipment:
1. Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
2. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
3. Disconnect power, from the monitor by unplugging the power cord from the electrical outlet.
6
HANNspree