Known Issues - ZyXEL Communications ZyAIR G-3000H Firmware Release Notes

www.zyxel.com
6. WPA2 support of Windows XP service pack 2 may need to install Update for Windows XP
(KB893357) manually. Additionally, please update latest wireless adapter driver from vender
site in order to get WPA2 / WMM support.
7. Please add an additional MAC entry "FF:FF:FF:FF:FF:FF" in the L2isolation when operating
mode is MESSID to make L2isolation work properly.
8. Current MESSID mode can set different security mode for different SSID, but not all types of
combinations can work if supplicant is windows wireless zero configuration ( shorten as WZC
below). If AP is configurated to a security combination which is not listed below, WZC may
not connect to some SSID successfully. Please reference detailed information from the
following table. Other supplicants ( Funk Odyssey / ZyXEL client tool ) may connect to
security combination which is not listed on the table.
NONE WEP 8021X
-ONLY
NONE
WEP
8021X-ONLY
8021X-
DYNAMIC64
8021X-
DYNAMIC128
8021X-
STATIC64
8021X-
STATIC128
WPA
WPA-PSK
WPA-MIX
WPA2
WPA2-PSK
WPA2-MIX
WPA2-PSK-
MIX
NO ACCESS
Compatibility table of Security policies of windows XP supplicant
9. Under MESSID mode, while public SSID status change from enabled to disabled, some STA
will cache this scan result in the space of three minute and user can find this SSID in the STA
scan list. User can disable STA driver to delete the scan result which cache in the STA

Known Issues:

1. WinXP supplicant doesn't work when it configures as 802.1x authentication with static WEP
key.
ZyXEL Confidential
8021X- 8021X- 8021X-
DYNAMIC64 DYNAMIC128 STATIC64
8021X- WPA WPA WPA WPA2 WPA2
STATIC128 - -
PSK MIX
WPA2 WPA2- NO
-PSK -MIX PSK- ACCESS
MIX
3/23