ZyXEL Communications ZyAIR G-3000H Firmware Release Notes page 15

www.zyxel.com
display
saveall
security
<1/2/3/.../16>
display
saveall
radius
<1/2/3/4>
ZyXEL Confidential
radius
qos
l2isolation
macfilter
clear
save
show
name
mode
wep
keysize
auth
key1
key2
key3
key4
keyindex
reauthtime
idletime
groupkeytime
passphrase
clear
save
show
name
primaryauth
primaryacct
backupauth
backupacct
clear
save
<radius profile name>
<qos profile name>
<enable | disable>
<enable | disable>
<profile name>
<security mode>
<64 | 128> < ascii | hex >
<open | shared | auto>
<seconds>
<seconds>
<seconds>
<key string>
<profile name>
<host> <port> <shared
secret> <enable | disable>
<host> <port> <shared
secret> <enable | disable>
<host> <port> <shared
secret> <enable | disable>
<host> <port> <shared
secret> <enable | disable>
set selected radius profile
index
set selected qos profile index
set L2 isolation enable /
disable
set macfilter enable / disable
clear profile setting to default
save current profile to flash
display current profile
information
display a brief list of all SSID
profiles
save all changed profiles into
flash
set name of the security
profile
security system mode
selection.
set WEP keysize (64-bits /
128-bits) and WEP key
encoding
set WEP authentication
method
set WEP key string 1
set WEP key string 2
set WEP key string 3
set WEP key string 4
key index (1~4)
time for re-authentication
idle time before force de-
association
time for group key update
passphrase for WPA-PSK and
WPA2-PSK
clear profile setting to default
save current profile to flash
display current profile
information
display a brief list of all
security profiles
save all changed profiles into
flash
set name of the radius profile
set primary radius
authentication server setting
set primary radius accounting
server setting
set backup radius
authentication server setting
set backup radius accounting
server setting
clear profile setting to default
save current profile to flash
15/23