ZyXEL Communications ZyAIR G-3000H Firmware Release Notes page 14

www.zyxel.com
Vantage Related Command
cnm active [0/1]
sgid
managerIP [addr]
debug [0/1]
reset
encrykey [string]
encrymode [0/1/2]
keepalive
version
Wireless LAN Profile Configuration Related Command
wcfg
ssid
<1/2/3/.../16>
ZyXEL Confidential
level [debug level]
trace
user [username]
Command
Command
name
ssid
vlan
rxvlan
security
set ieee802.1x debug message level
show all supplications in the supplication table
show the specified user status in the supplicant
table
Display or set the CNM features to enable or
disable .
0: disable
1: enable CNM features and communicate
through WAN interface.
Display sgid which is the unique ID of the
device in Vantage.
Display or set the IP of Vantage
server/COMServer which manage this device.
[addr] specifies the IP of the Vantage
serve/COMServer.
Display or set the way of outputting CNM
debug messages.
0: disable debug messages.
1: output the debug messages to console and
can accept SGMP inquire message only after
the device is registered to Vantage server.
Reset the state machine of SGMP and return to
the state of SGMP_STATE_UNKNOWN.
Device will re-register to Vantage server if
CNM is active.
Display or set encryption key. [string] specifies
the encryption key. to be set.
Key length can not less than 8 alphanumeric
characters long, if ecrymode is DES.
Key length can not less than 24 alphanumeric
characters long, if ecrymode is 3DES.
Display or set the encryption mode for SGMP
messages.
[0:NONE /1:DES/2:3DES] specifies the
encryption mode to be set.
Display the time(second) to report agent
keepalive
0: disable.
Set the time(second) to report agent keepalive;
the valid range : 10 ~ 2147483647
Display the Vantage agent version.
<profile name>
<ssid>
<vlan ID>
<rx vlan ID>
<security profile name>
Home
Description
Home
Description
set name of the SSID profile
set SSID
set VLAN ID
set Rx VLAN ID
set selected security profile
index
14/23