Table of Contents
Advertisement
~ REPEAT
.
PRINTING
Tape End Mark
The Repeat function allows you to repeatedly
print the
same label up to ten times.
To use the Repeat Printing function:
(1) Hold down the CODE key and press the REPEAT key.
(2) The following message appears on the display:
SIL
1
w?
Mm
4
8
CAPS
(3) Select the number of labels you want.
For example, if
you want ten labels to be printed, type 10.
(4) Press print.
Notes:
A maximum of ten copies can be printed.
Cutting is not done automatically.
Never try to cut the tape during printing.
There is 4-mm space between repeated messages,
even if Auto Tape Feed Mode is not set.
Press the ON/OFF key immediately if the tape runs
out before all printing is finished.
ON/OFF Key
-28-
Advertisement
Table of Contents
