Table of Contents
Advertisement
34.5 in (876.2 mm)
A– Height (Lifting Hook)
46.0 (1,168.4 mm)
C–Width
75.2 (1,910.1 mm)
D–Length
Weight – Operating
See Table 3
Sound Pressure
97 db
2.5g (24.5 m/s2)
Vibration
46 in (117 cm)
Ring Diameter
Number of Blades
3 or 4
Rotor – RPM (Gasoline)
60 to 125
48 (233)
Path Width – in. (cm)
Table
BA-Series Trowel Specifications
B– Height Engagement Lever)
41.1 in (1,044.2 mm)
Blade Tip Speed – FPM (m/s)
1,478 fpm (7.5 m/s)
SPECIF1CATIONS (TROWEL)
Figure 2. BA
-
Series Trowel Dimensions
NOTE:
1.
Sound pressure is a weighted measure. Measured at the
operators ear position while the walk-behind trowel is
operating at full throttle on concrete in a manner most often
experienced in "normat circumstances. Sound pressure
may vary depending upon the condition of the concrete.
Hearing protection is always recommended.
The vibration level indicated is the maximum RMS (Root
Mean Square) value obtained at the handle grip while
operating the walk-behind trowel on curing concrete in a
manner most often experienced in "norme circumstances.
Values were obtained from all three axes of motion. The
values shown represent the maximum RMS value from
these measurements.
BA-SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL REV. #3 (11/30/04) — PAGE 13
Advertisement
Table of Contents
Troubleshooting
