Bunn Premia 61000.0000 Programming Manual page 27

Bean Hopper
Hoppers have sensors which will indicate when
the hopper is low on beans.
1. Select the Bean Hopper tab to adjust the
sensor sensitivity or enable/disable sensors
individually.
2. To enable/disable bean hopper level monitoring,
press in the check box for any or all hoppers.
3. If any changes have been made, press Save
to confirm.
Grounds Bin
1. Select the Grounds Bin tab to edit or enable/
disable the monitoring system for waste. The
grounds bin level is monitored by measuring
the grinder on time. When the machine has
determined that enough coffee has been used,
a grounds bin full message will be displayed.
If the grounds bucket is too full, sliding the
button to the left will reduce the amount of
grounds in the bucket before indicating full.
If there is extra room in the bucket at the full
signal, sliding the button to the right will allow
more grounds before indicating full.
2. Press the check box next to "Grounds Bin
Monitoring Enabled" to remove the green
check mark, and disable grounds bin monitoring.
3. Press Save.
ADVANCED MENU < MACHINE SETTINGS
2
27
1
3