Table of Contents
Advertisement
Product Setup
How to Access:
1. Touch and hold the BUNN logo for a few
seconds until SERVICE ACCESS appears
on the display.
2. Select the Advanced Setup icon.
3. Enter passcode 6601.
4. Select Product Setup icon.
The Product Setup screen contains multiple
pages that can be accessed by selecting a tab
on the left of the screen and is used to change
blends, assign hoppers, and select what bever-
ages will be available:
Beverages Offered: This tab will allow an
operator to select what beverages will be made
available to the consumer. The enabled products
will be displayed on the main screen. The
reservoir schedule can also be assigned from a
template using this screen.
Bean Hoppers: This tab will allow the operator
to set what type of blend is in each hopper
by swiping up or down to navigate through
the various choices. The blend needs to be
assigned to a hopper in order for the beverage to
be displayed on the main screen.
ADVANCED MENU < PRODUCT SETUP
21
Advertisement
Table of Contents
