Table of Contents
Advertisement
Product Setup < Beverages Offered
This tab will allow an operator to select what
beverages will be made available to the consumer.
The enabled products will be displayed on the
main screen. The reservoir schedule can also be
assigned from a template using this screen.
1. Select the BEVERAGES OFFERED tab to
make edits to what is available to the customer
on the homescreen.
3. Use the Up and Down arrows to change out
recipes available for dispense.
4. Choose the Enable boxes for the beverages you
want available to enable or disable.
5. Use the Drop Down box to assign a reservoir
schedule (saved from templates) to the bever-
age.
6. Press SAVE if changes are made.
Product Setup < Bean Hoppers
This tab will allow the operator to set what type of
blend is in each hopper by swiping up or down to
navigate through the various choices. The blend
needs to be assigned to a hopper in order for the
beverage to be displayed on the main screen.
1. Select the BEAN HOPPERS tab to assign
which Product goes in which hopper.
2. Press the Enable box to select which hopper
to use.
3. After Enabling a hopper, you can use the up
and down arrows to select an icon for the
Product in that hopper.
4. Press Save when finished.
ADVANCED MENU < PRODUCT SETUP
1
5
1
22
3
4
2
4
continued >
3
Advertisement
Table of Contents
