Adjusting The On-Board Computer And Fit Compact - Bosch ZEMO ZE FS P12 Translation Of The Original Operating Instructions

6.4.17 Adjusting the on-board computer and FIT Compact

CAUTION
!
Crash caused by distraction
A lack of concentration while riding increases the
risk of an accident. This may cause a crash with
serious injuries.
 Never allow yourself to be distracted by the
on-board computer.
 Stop pedelec if you want to make inputs on the
on-board computer other than change the
level of assistance. Only enter data when the
bicycle is stationary.
Notice
 Do not use on-board computer as a handle.
The on-board computer may become
irreparably damaged if you use it to lift the
pedelec.
6.4.17.1 Inserting the display
1 Place the display screen lower section into the
mount.
2 Gently press the display downwards until you
feel the display latch into place.
1
Figure 128: Inserting the display
MY23Z12 - 12_1.0_26.01.2024
6.4.17.2 Securing the display
It is possible to secure the display in its mount so
that it cannot be removed.
1
Figure 129: Fastening the blocking screw
3 Insert display into the mount.
4 Fasten the blocking screw into its designated
thread in the display from below.
6.4.17.3 Removing the display
The display can be removed if it is not secured.

1 Press the release switch.
2 Remove display upwards.
 The system is switched off by removing the
display.
1
2
Figure 130: Removing the display
Operation
2
122