13
Appendix
I.
Translation of the original EC/EU Declaration of Conformity
Manufacturer
ZEG Zweirad-Einkaufs-Genossenschaft eG
Longericher Strasse 2
50739 Köln
Germany
The machine, pedelec types:
ZA-15-0017
ZA-15-0018
Year of manufacture 2022 to year of manufacture 2025, complies with the following applicable
EU provisions:
•
Machinery Directive 2006/42/EC
•
RoHS Directive 2011/65/EU Restriction of the use of certain hazardous substances in electrical and
electronic equipment
•
Electromagnetic Compatibility Directive 2014/30/EU.
The safety objectives in the Low Voltage Directive 2014/35/EU have been met in compliance with
Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC.
The following harmonised standards have been applied:
•
EN 15194:2017 Cycles – Electrically power assisted cycles – EPAC bicycles
Except Section 6 Instructions for Use; harmonised standard EN ISO 20607:2019 used in its place
•
EN ISO 20607: 2019 Safety of machinery – Instruction handbook – General drafting principles.
The following other technical standards have been applied:
•
EN 11243:2016-12 Cycles – Pannier racks for bicycles – Requirements and test methods
•
EN 17406:2021-11 Classification for bicycles usage
•
EN 62133-2:2017-11 Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety
requirements for portable sealed secondary cells, and for batteries made from them, for use in portable
applications – Part 2: Lithium.
Cologne, 20.10.2023
.................................................................................................................................
Egbert Hageböck, Chairman, ZEG Zweirad-Einkaufs-Genossenschaft eG
* Community member who is authorised to compile the technical documentation
MY23Z12 - 12_1.0_26.01.2024
Vuca Evo X1
Vuca Evo FSX1
Authorised representative for documentation*
c/o ZEG Zweirad-Einkaufs-Genossenschaft eG
Longericher Strasse 2
50739 Köln
Germany
City and trekking bicycle
City and trekking bicycle
Appendix
257