Fitting; Fitting And Removing The On-Board Computer (See Figure A) - Bosch Kiox Original Operating Instructions

Fitting

A
(18)
(14)
(16)
(1) On-board computer
(5) Holder for on-board computer
(14) Drive unit contacts
(15) Locking screw for on-board computer
(16) Headset screw
(18) Magnetic holder
Fitting and removing the on-board computer (see figure A)
Fit the lower part of the Kiox into the holder (5) first and tilt it forward gently
until you can feel that the on-board computer is firmly fixed in the magnetic
holder.
To remove the on-board computer, hold it by the top end and pull it towards
you until it disengages from the magnetic holder.
Remove the on-board computer when you park the eBike.
u
The on-board computer can be secured in place to prevent it from being re-
moved from the holder. To do this, loosen the headset screw (16) until the
Bosch eBike Systems
(1)
1
(5)
(15)
2
1 270 020 Ken | (07.09.2023)
English – 13