Cli Command List - ZyXEL Communications Prestige P-2802HWL-I1 Support Notes

Prestige 2802HWL-Ix Support Notes
1. Trace LAN packet
2. Trace WAN packet
1. Trace LAN packet
1.1 Disable the capture of the WAN packet by entering: sys trcp channel mpoa00 none
1.2 Enable the capture of the LAN packet by entering: sys trcp channel enet0 bothway
1.3 Enable the trace log by entering: sys trcp sw on &
sys trcl sw on
1.4 Wait for packet passing through the Prestige over LAN
1.5 Disable the trace log by entering: sys trcp sw off &
sys trcl sw off
1.6 Display the trace briefly by entering: sys trcp brief
1.7 Display specific packets by using: sys trcp parse <from_index> <to_index>
2. Trace WAN packet
sys trcp channel enet0 none
1.1 Disable the capture of the LAN packet by entering:
sys trcp channel mpoa00 bothway
1.2 Enable the capture of the WAN packet by entering:
sys trcp sw on &
1.3 Enable the trace log by entering:
sys trcl sw on
1.4 Wait for packet passing through the Prestige over WAN
sys trcp sw off &
1.5 Disable the trace log by entering:
sys trcl sw off
sys trcp brief
1.6 Display the trace briefly by entering:
sys trcp parse <from_index> <to_index>
1.7 Display specific packets by using:

CLI Command List

The latest CI command list is available in release notes of every ZyXEL firmware release. Please go to
ZyXEL public WEB site http://www.zyxel.com/support/download.php to download firmware package
(*.zip), you should unzip the package to get the release note in PDF format.
187
All contents copyright (c) 2007 ZyXEL Communications Corporation.