ZyXEL Communications P-660HWP-D1 Release Note page 3

ZyXEL Confidential
( the PC using static IP 192.168.1.34 ).
Modifications in V3.40(APD.2)b2 | 11/05/2007
1. [Enhancement]: Change "Network Password" to "Network Name" in web GUI and CI
command.
2. [Enhancement]: Auto detect Intellon F/W version in our RAS code, and auto update
Intellon F/W if current version is older than the one in RAS code.
3. [Bugfix]: SPRID:071021056
Symptom: use CI Command "sys atwz" to modify MAC address then use CI Command
"powerline display" can not get the powerline information
4. [Bugfix]: SPRID :071022064
Symptom: set nmk in GUI have problem.
Condition:
(1) GUI-＞Network-＞Powerline , Enter a new nmk and apply it, GUI show "INTERNAL
ERROR".
(2) SMT show "set nmk successful!"
(3) Enter GUI again ,nmk show empty.
5. [Bugfix]: SPRID: 071021055
Symptom: enable triple play and use bridge mode, bound powerline to a single PVC , pc
linked to PLA400 can get dynamic ip from dhcp server behind the bridge PVC.
6. [Bugfix]: SPRID: 071021058
Symptom: Use CI Command "powerline setnmk" to set the NMK, then use CI Command
"powerline display" to show the nmk and the result is "unknown.".
7. [Bugfix]: SPRID: 071021059
Symptom: Use CI Command "powerline config nmk" to set the nmk, "powerline display"
show the nmk has been changed. Change PLA 400's nmk to be same with the new nmk,
device can not connect to PLA 400.
8. [Bugfix]: SPRID: 071021057
Symptom: In default configuration default "LAN multicast" is None, but on LAN side can
receive IGMP packets.
9. [Bugfix]: SPRID: 071021061
Symptom: Help page show wrong information. The content in help page is not accordant
to the content in working page
10. [Bugfix]: SPRID: 071021060
Symptom: Default firewall-＞Bypass triangle route is disabled, so traffic redirect can not
open website
11. [Bugfix]: SPRID: 071102101
Symptom: use "sys atwz" to modify mac, but can't modify the powerline module's mac at
the same time.
12. [Bugfix]: SPRID: N/A
Symptom: Static route remote node mode doesn't work.
Modifications in V3.40(APD.2)b1 | 10/10/2007
1.
[Feature Enhance]:
2.
[Feature Enhance]: Have Static routing configuration in WEB GUI, and can select
gateway IP address mode or gateway remote node mode.
3.
[Feature Enhance]: Public/Private IP (allow to have private IP going through NAT while
global – without NAT. This is to be used with FF NAT).
4.
[Feature Enhance]: Make PAT in NAT port forwarding, add "TCP/UDP" selection there
too.
5.
[Feature Enhance]: Add a possibility to add connections without default gateway (except
1-st connection)
340APD2C0.docdoc
Merge Intellon F/W 3.0.5