Table of Contents
Advertisement
Operations
Delay End
You can set the washer to finish your wash automatically at a later time by choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the
time the wash will finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End (or the +/- button) repeatedly until a desired end time is set.
3. Press and hold Start/Pause (Hold to Start). The Delay End indicator blinks and the
washing machine tumbles the drum to sense the weight of the load if load sensing is
preset for the selected cycle. When complete, it displays your set time with the timer
running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End
option to the current cycle with a 3-hour setting, and then press Start/Pause (Hold to
Start) at 2:00 p.m. The washer starts operating at 3:00 p.m. and ends at 5:00 p.m. Provided
below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
Load sensor
The load sensor icon lights up when you select a cycle that supports load sensing. Some
cycles may not support loading sensing. Once you start the cycle, the icon blinks or stays
solid during the load sensing process, and turns off when the process is complete.
38
English
3:00 pm
Start
5:00 pm
End
Advertisement
Table of Contents
