Table of Contents
Advertisement
Flooring
For best performance, the washer must be installed on a solid floor. Wood floors may
need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft
tile surfaces do not provide good resistance to vibrations and may cause the washer to
move slightly during the spin cycle.
CAUTION
Do NOT install the washer on a platform or a poorly supported structure.
Water temperature
Do not install the washer in areas where water may freeze as the washer always retains
some water in its water valves, pumps, and/or hoses. Frozen water left in the connection
parts may cause damage to belts, the pump, and other components of the washer.
Alcove or closet installation
Minimum clearance for stable operation:
Sides
Top
Rear
Front
If both the washer and a dryer are installed in the same location, the front of the alcove or
closet must have two unobstructed air openings for a combined minimum total area of 72
in² (465 cm²).
Undercounter installation
A
B
1 in. (25 mm)
1 in. (25 mm)
2 in. (50 mm)
1 in. (25 mm)
A
B
34.4 in. (875 mm)
1 in. (25 mm)
C
D
C
D
23.6 in. (600 mm)
1 in. (25 mm)
English 19
Advertisement
Table of Contents
