2. Preparations prior to camera shipment
2.1 Site preparation
The customer is responsible for selecting the camera site and preparing for the
installation of the camera. Proper site preparation includes:
Selection of best camera position (ideally with 360° view)
•
Installation of camera mast
•
Selection of connection type (wired Ethernet, wifi or cellular 4G)
•
Preparation of network connection requirements:
•
DHCP or fixed IP
•
Firewall settings as required
•
Preparation of power connection 110V or 220V with protected location for mains
•
adaptor (for example in waterproof box if installed outdoors)
Installation of power supply and lightning/surge protection
•
•
Installation of power cable - maximum length: 15m / 50 ft
•
Installation of Ethernet cable (if wired) – maximum length: 100m (or longer if
connecting through switch)
Installation Manual Roundshot Livecam Generation 4 - April 2024 - © by Seitz Phototechnik AG / Switzerland
www.roundshot.com
page 5