Table of Contents
Advertisement
3.2 Network connection with GSM network (4G) – (continued)
The camera is now connected to your GSM network. Unplug your ethernet cable.
After a reboot the camera will connect to the GSM network within 5-10 minutes.
Contact the Roundshot team who will check if the connection to the VPN (remote
access to camera) has been successfully established.
If yes, go ahead with the installation of the camera on the mast. Once the
camera is installed, the Roundshot team will now connect to the camera to
configure it for service.
If no, please go to section «trouble-shooting» to establish the connection.
Installation Manual Roundshot Livecam Generation 4 - April 2024 - © by Seitz Phototechnik AG / Switzerland
www.roundshot.com
page 29
Advertisement
Table of Contents
