Table of Contents
Advertisement
2.1.1. Installation of camera mast (continued)
Camera cable connectors – ferrite elements
24V power cable
The ferrite elements are installed on the cable strands close to the camera. Installing
them on the opposite side of the cable is possible but will be less beneficial for the camera.
Ferrite beads are used in electronic circuits to suppress interference, noise,
crosstalk, and other high-frequency disturbances from supply voltage lines,
data signal lines, and ground planes.
Installation Manual Roundshot Livecam Generation 4 - April 2024 - © by Seitz Phototechnik AG / Switzerland
RJ45 cable (ethernet)
www.roundshot.com
page 10
Advertisement
Table of Contents
