Table of Contents
Advertisement
slide it out of the seats B at the back.
• When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
Removing the vertical oven rack/tray
support frames
Removing the rack/tray support frames enables
the sides to be cleaned more easily.
To remove the rack/tray support frames:
• Pull the frame upwards to remove it from its
side housings.
• When cleaning is complete, repeat the
above procedures to put the rack/tray
support frames back in.
Cleaning the roof of the oven (only
for some models/cavities)
See General safety instructions.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element during
cleaning.
The appliance is equipped with a tilting grill
element that allows for easy cleaning of the roof
of the oven cavity.
914779958/A
1. Free the upper heating element by gently
lifting it and rotating its retaining latch by 90
degrees.
2. Gently lower the heating element until it
stops.
3. When you have finished cleaning, place the
heating element back in position and turn
the retaining latch to lock it in place.
Vapor Clean (on some models only)
See General safety instructions.
The Vapor Clean function is an assisted
cleaning procedure that facilitates the
removal of dirt. Thanks to this process, it
is possible to clean the inside of the
oven very easily. The dirt residues are
softened by the heat and water vapour
for easier removal afterwards.
Preliminary operations
Before starting the Vapor Clean cycle:
• Completely remove all accessories from
inside the oven.
• Remove the temperature probe, if present.
• Remove the self-cleaning panels, if present.
• Pour approx. 120 cc of water onto the floor
of the oven. Make sure it does not overflow
out of the cavity.
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray towards the side
walls, upwards, downwards and towards
CLEANING AND MAINTENANCE - 23
Advertisement
Table of Contents
