Table of Contents
Advertisement
2.2 WAN
2.3 LAN
2.4 NAT
2.5 Firewall
Select one of the above five General Setup selections and proceed to the manual's relevant sub-
section
This section allows you to select the connection method in order
to establish a connection with your ISP (same as the Quick
Setup Wizard section)
You can specify the LAN segment's IP address, subnet Mask,
enable/disable DHCP and select an IP range for your LAN. You
also can configure print server here.
You can configure the Address Mapping, Virtual Server and
Special Applications functions in this section. This allows you to
specify what user/packet can pass your router's NAT.
The Firewall section allows you to configure Access Control,
Hacker Prevention and DMZ.
23
Advertisement
Table of Contents
