Table of Contents
Advertisement
Subnet Mask
Gateway
User ID
Password
PPTP Gateway
Idle Time
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the PPTP connection. You can start using the router now, if you
wish to use some of the advance features supported by this router see chapter 2, 3, 4.
establish a PPTP connection.
Enter the Subnet Mask provided by your ISP
(e.g. 255.255.255.0)
Enter the IP address of the ISP Gateway
Enter the User Name provided by your ISP for the PPTP
connection. Sometimes called a Connection ID
Enter the Password provided by your ISP for the PPTP
connection
If your LAN has a PPTP gateway, then enter that PPTP gateway
IP address here. If you do not have a PPTP gateway then enter
the ISP's Gateway IP address above
You can
specify an idle time threshold (minutes) for the WAN
port. This means if no packets have been sent (no one using the
Internet) throughout this specified period, then the router will
automatically disconnect the connection with your ISP. Note: Idle
time "0" means no time out, e.g. no time restriction (always On)
21
Advertisement
Table of Contents
