Table of Contents
Advertisement
Auto-reconnect
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the PPPoE connection. You can start using the router now, if you
wish to use some of the advance features supported by this router see chapter 2, 3, 4.
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section.
Parameter
IP Address
Internet) during this specified period, the router will automatically
disconnect the connection with your ISP. Note: Idle time "0"
means no time out, e.g. no time restriction (always On)
If you check the Auto-reconnect function, then when the WAN
connection is disconnected the router will automatically re-
connect when there is a request by a user to access the Internet
Description
This is the IP address that your ISP has given you to
20
Advertisement
Table of Contents
