Cable Modem - Zonet ZSR0104DE User Manual

Zonet zsr0104de: quick setup
Table of Contents

Advertisement

1.1 Cable Modem

1.2 Fixed-IP xDSL
1.3 PPPoE
1.4 PPTP
Click on one of the WAN type and then proceed to the manual's relevant sub-section (1.1, 1.2,
1.3 or 1.4). Click on Back to return to the previous screen.
1.1 Cable Modem
Choose Cable Modem if your ISP will automatically give you an IP address. Some ISP's may also
require that you fill in additional information such as Host Name and MAC address (see screen
below).
Note: The Host Name and MAC address section is optional and you can skip this section if your
ISP does not require these settings for you to connect to the Internet.
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
16

Advertisement

Table of Contents
loading

Table of Contents