Honda CBR1000RA 2018 Owner's Manual page 195

Make sure that the lug on the brake
2.
caliper bracket is positioned in the slot on
the swingarm.
Swingarm
Brake caliper
bracket
Slot
Lug
Tyre Puncture
Adjust the drive chain.
3.
Install and tighten the rear axle nut.
4.
Torque: 135 N·m (13.8 kgf·m, 100 lbf·ft).
After installing the wheel, apply the brake
5.
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
P. 154
2
191