Removing & Installing Body Components
#
Removal
Make sure the ignition switch is in the
(Off) position.
Remove the front seat.
1.
Unhook the rubber strap from left side.
2.
Disconnect the negative - terminal from
3.
the battery.
Disconnect the positive + terminal from the
4.
battery.
Remove the battery taking care not to drop
5.
the terminal nuts.
138
Battery
u
P. 139
2
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
2
P. 74
2
P. 123
2
P. 192