AMD SB700 User Manual page 38

Based m/b for socket am2+ quad core amd processor
Hide thumbs Also See for SB700:
Table of Contents

Advertisement

CPU/HT Reference Clk(MHz)
PCIE Reference Clock
SB Refence Clock
Memory clock Mode
Memory clock Value
AOD Compatibility
CPU Voltage at Next Boot
CPU Vorce 7-Shift
VDIMM Select
NB Voltage Setting
HT Link width
HT Link Frequency
DRAM Configuration
IH Flow-Control Mode
HT Link Tristate
ZX LCLK Mode
UNITED ID Clumping
Embedded Memtest Test
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Profile Load
Profile Save
CPU Feature
CPU/HT Reference Clk(MHz)
PCIE Reference Clock
SB Refence Clock
Memory clock Mode
Memory clock Value
AOD Compatibility
CPU Voltage at Next Boot
CPU Vorce 7-Shift
VDIMM Select
NB Voltage Setting
HT Link width
HT Link Frequency
DRAM Configuration
IH Flow-Control Mode
HT Link Tristate
ZX LCLK Mode
UNITED ID Clumping
Embedded Memtest Test
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
CPU/HT Reference Clock
power button or reset button.
CPU Vcore
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by
this function for the precise over-clocking for extra demanding of performance.
NB Voltage
This item allows you to select value of Voltage for North Bridge Chipset.
IH Flow-Control Mode:
Isochronous (ISOC) Flow Control Mode enable will make the HT Link communication have
[200]
[100]
[100]
Auto
DDR533
Disabled
Default
Normal
1.95V
Default
Auto
Auto
Press Enter
Disabled
Disabled
Disabled
Disabled
Disabled
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
VDIMM SELECT
Press Enter
Press Enter
Press Enter
[200]
[100]
[100]
Auto
DDR533
Disabled
Default
Normal
1.95V
Default
Auto
Auto
Press Enter
Disabled
Disabled
Disabled
Disabled
Disabled
F6:Optimized Defaults
Immediately press F12 key to load defaults after pressing the
Menu Level >
CPU Vcore 7-shift
Normal
+5%
+10%
+35%
↑↓:Move ENTER:Accept
ESC:Abort
F7:Standard Defaults
Menu Level >
VDIMM Select
1.70v
1.75v
.........
2.85v
↑↓:Move ENTER:Accept ESC:Abort
F7:Standard Defaults
33
[ ]
[ ]
[ ]
.........
[ ]
Item Help
[ ]
[ ]
[ ]

Advertisement

Table of Contents
loading

This manual is also suitable for:

770

Table of Contents