AF GAIN
CONTROL
(19 on Figure 5)
RF ATT CONTROL
(20 on Figure 5)
DIAL
SCALE
(21 on Figure 5)
DIAL POINTER
(22 on Figure 5)
frequency to be added to the band frequency to establish
the transceiver's operating frequency.
HEATER
SWITCH
(26 on Figure 5)
This switch turns the heater circuits of the three transmit:
ting tubes on an off. The heaters would normally be turned
to OFF to reduce power consumption in mobile or portable
receiving.
When
the switch is turned OFF, the T. MUTE
light is illuminated and the heaters are turned off.
11