Table of Contents
Advertisement
DATE/CLOCK SETTING
The date and clock can be recorded on your tapes to act as a handy reference when viewing them at a later time.
Use the following procedure to set up this display for the current date and time.
PWN
20
. Load the camera/recorder's date/clock battery as
described on page 8.
. Turn on power of camera/recorder.
. Slide VIDEO/CAM
select switch to "CAM".
. Press DATE/TIME button.
"0:00" and ''1/1/89' appears in the viewfinder and
"4"" flashes.
. Press SET button to select correct date.
Hold but-
ton down
to advance
rapidly.
When
the correc
date appears, press SHIFT button.
:
Press SET button to select correct month.
Hold
button down to advance rapidly.
When the correct
month appears, press SHIFT button.
10.
TIME LAPSE
SELF TIMER
Street Soren =
NEGA, POS!
DISPLAY RESET
REVIEW
jon
Tt GND)
E20
SET Button
SHIFT
Button
DATE/TIME
Button
. Press SET button to select year, and then press
SHIFT button.
v4
Jou: 00
5/11/89
. Press SET button to select correct hour, and then
press SHIFT button.
. Press SET button to select correct minute.
6:30
5/11/89
|
After setting correct minute, press SHIFT button
again to erase the flashing cursor and start the
internal clock.
NOTES:
To
correct
date/clock
information
during
pro-
gramming
or after starting the date/clock,
press
SHIFT button until the incorrect digit is flashing.
Then use SET button to enter the correct digit.
The date/clock graphics will be recorded whenever
they appear in the viewfinder.
To display date and
clock together, press DATE/TIME
button.
To dis-
play date
only, press
DATE/TIME
button
again.
Pressing DATE/TIME
button a third time removes
both graphics.
Advertisement
Table of Contents
