Table of Contents
Advertisement
USING THE VIDEO DUBBING FEATURE
The video dubbing feature lets you record new pictures on a previous recorded tape without erasing the original audio
(sound).
When you video dub a tape, the previous video is erased and replaced with the new pictures.
In video dubbing,
the source of the video dub is whatever you are seeing in the viewfinder.
Audio/Video Output Cable
1. Insert a recorded tape.
Be sure that the record safety tab is not missing.
VIDEO/CAM
Select Switch
2. Slide VIDEO/CAM select switch to "VIDEO".
4. Press PLAY button again to search the exact position
where
you stop dubbing
and then press STILL/
REC/PAUSE
button.
5. Press
DISPLAY
button so counter
memory
"M"
appears and then press RESET/E-240 button to set
the counter reading to '0000''.
6. Press REW button to rewind the tape to the approxi-
mate position from which you want to start dubbing.
7. Press PLAY
button, and when the exact position
from which you start to dub is reached, press STILL/
REC/PAUSE button.
8. Press VIDEO DUB and PLAY buttons simultaneously.
"\/.DUB" is displayed in the viewfinder, and at the
same time the picture to be dubbed appears.
9. Press STILL/REC/PAUSE button.
Video dubbing will start and will stop when the coun-
ter reads ''0000''.
Advertisement
Table of Contents
